Features
- Input voltage: AC90-277V
- Operating frequency: 50/60Hz
- Power factor: 0.90
- Ambient temperature range: -20°C ~+40°C
- Color Temp: 3000K~5000K
- THD: <20%
- IP Rating: IP20
- CRI: >80Ra
- Beam angle: 120°
- Base: G13
- Cover:Clear,Frosted,Stripe
- Luminous Flux:>120lm/w
- Housing material:6063-T5
- Suitable for Damp Location
- Suitable to use in UL approved enclosed fixtures
- Available for Single Ended Power or Double Ended Power
- 5 years’ warranty
Installation Instruction
Compatible Ballast tube Installation
Applications：
◎ Widely used in hotels, bars, shopping malls, corridor restroom, Museum, exhibition hall,
the gatehouse signs, warehouse, Home interior lighting, atmosphere etc.
Single Installation Drawing
More than one installation Drawing
Installation Steps ：
1. G13 light foot insert the bracket slot ，Rotate 90° to check the tube give out light.
1.1．Cut off the AC before the Installation.
1.2．Check the ballast brand models. refer to the following list.
1.3．Load the tubes and check assembles are ok and then turn on the AC.
Notice For User
1. Disconnect power before installation, must operated by electrician
2. Take out the tube. Before installation please check if there is any unsatisfactory condition of the tube,
Such as whether the appearance is damaged or deformed, or the accessories are complete or not.
3. Please use it under correct input power range
4. This tube is non-dimmable
5. Not for outdoor or some where be exposed to rain(waterproof type available)
6. If the lights don’t work properly, please check the connections after turning off the power
7. Use ul approved 3-pin plug.