Features
- Input voltage: AC90-277V
- Operating frequency: 50/60Hz
- Power factor: 0.90
- Ambient temperature range: -20°C ~+40°C
- Color Temp: 3000K~5000K
- THD: <20%
- IP Rating: IP20
- CRI: >80Ra
- Beam angle: 120°
- Base: G13
- Cover:Clear,Frosted,Stripe
- Luminous Flux:>120lm/w
- Housing material:6063-T5
- Suitable for Damp Location
- Suitable to use in UL approved enclosed fixtures
- Available for Single Ended Power or Double Ended Power
- 5 years’ warranty
Installation Instruction
Installation:
- Please read the instructions before installation.
- Please cut off the power supply before installation.
- Choose the lamp holder according to the specification of the lamp, please make sure the working voltage is the same as the working voltage signed on the LED tube light.
- Please supply the power according the schematic of LED tube light(as follow, choose anyone).
- Please supply the power after make sure the working voltage is normal, lamp holder install well.
Supply power schematic of LED tube light
Notice For User
- Disconnect power before installation, must operated by electrician.
- Take out the tube, before installation. Please check if there is any unsatisfactory condition of the tube, such as whether the appearance is damaged or deformed, or the accessories are complete or not.
- Please use it under correct input power range.
- This tube is non-dimmable.
- Not for outdoor or some where be exposed to rain (waterproof type available)
- If the lights don’t work properly, please check the connections after turning off the power.
- Use UL approved 3-Pin plug.